Netti Customized Solutions for Back and Seat Unit
At Netti, we believe that anything is possible. If a user faces challenges that cannot be addressed with our standard range, we are ready to help. Sometimes it’s not just the user’s needs but also the environment that requires a customized solution – for example a narrow elevator or a small hallway in an apartment.
Our experienced team of technicians, sales staff and customer service works closely with our custom design department to adapt the chairs or accessories to meet individual requirements.
For further guidance or assistance, please contact the Netti Competence Center.
Side support in aluminium
A challenge in wheelchair assessment can be to maintain the correct seating position. We need to create stability at the areas where the wheelchair user cannot create sufficient stability on its own. We have standard side supports for this and back cushions with extra stability in the side support, but sometimes this is not enough.
Here we have made an aluminium support mounted directly on the back tube to offer the needed stability for the user.
Back hinges for a wider back
The correct position of the pelvis is a key area for the good seating position; the pelvis will then guide the spine above. Some users upper body may be wider that the actual seat width needed. Here we can make the back hinges for our Netti III Family wider or even narrower and mount them with a back unit in the correct width.
This adjustment is part of the Netti V standard adjustment - have a look at our Netti V Family.
One-piece aluminium back
One piece back tubes extended to back height 600 mm for extra stability reasons. Here shown with a one-piece aluminium back.
Low back cushion
We have several standard back cushions in our programme. As standard available in back height 500 and 600 mm.
But if this does not fit your user, we are able to make customized cushions. Please use our request form and we will be happy to make a quote for you.
A customized cushion can vary in:
- Back height
- Shape of side supports
- Seat width
High back cushion
Here an example of a customized cushion made longer in the top and as one-piece solution.
Netti Sit cushion with abduction block built-in
Our seat cushions can also be customized in many ways. If our standard cushions do not meet the requirements, do not hesitate to contact us for a customized solution.
- Special width and depth
- Special cover
- Abduction or wedge-shaped
Extra wide side support aluminium and special made back cushion
Here is an examle of a customized back cushion with wider side support than standard. To offer even more stability and support, an aluminium support has been mounted directly on the back tubes.
Customized seat cushion
For users with contractions , we can customize the seat plate and the seat cushion to ensure comfort and a good seating solution
