• Ready to use!
  • Good pressure distribution and stabilising properties.
  • Supplied customised for the respective user – no adaptation and adjustment necessary.
  • Supplied with a waterproof but breathable intermediate cover to protect the foam cushion.
  • The foam properties are adapted to the size of the cushion – and therefore the user's weight.
  • Breathable 3D, wipeable Easy Care or temperature-stabilising °C cover.

  • The use of softer foam at the rear end of the intermediate layer prevents the forward sliding effect.
  • The sectioned top foam reduces surface tension and ensures that the user quickly sinks into the cushion so that the pressure is rapidly distributed.
  • The integrated abduction block affects straightening of the spine and improves the sitting position.
  • Flexible material improves the carrying capacity of the bottom layer and reduces the overall weight.
  • A high carrying capacity of the bottom layer prevents the ‘sit through’ effect and increases stability.
  • Firmer foam in the front and middle layer stabilises the front edge of the seat cushion and the thigh.
  • Side supports provide more stability and contact area.
  • 3D

    Breathable, elastic and durable. The 3D mesh structure enhances the microclimate, ventilates and reduces heat build-up. This strengthens the skin and the resistance of the underlying tissue against internal and external influences, such as pressure and shear. 100% PES (Polyester).


    Elastic, semipermeable protective cover for cores. The cover is breathable and waterproof. Durable and wipeable. PES (Polyester) + PU.


    Durable, breathable, elastic, wipeable and hygienic. PES (Polyester) + PU.

  • °C

    Thermally stable, breathable, elastic and durable. Under the 3D cover, there is a temperture stable PCM fabric. This material is stabilised at 32°C, meaning that it gives off heat and insulates when the temperature rises above/falls below this limit. The cover °C slows down and reduces the heating process of the skin and tissue.


In our documentation you will find a list of all offered sizes, article numbers and possible accessories. You find the information under the tab named "Documentation".
Please do not hesitate to contact our customer service, if you have questions or require further information. Please call or email:

+47 51 78 62 20 

+45 87 88 73 00
Main catalogue12.60 MB Download
Netti Cushions - seat and back cushions11.11 MB Download
Manual Netti Uno Seat and Netti Sit1.27 MB Download
  • Alu Rehab Knowledge Centre

    Through years of development and production of wheelchairs and seating systems, Alu Rehab has amassed much knowledge in this field. This we would like to share with you. Learn more about:

    Alu Rehab provides an improved seating system based on the 7 principles for maximum sitting comfort. The Netti Seating System supplements many features of the Netti wheelchairs. Together they form the optimum solution with multi-point stabilisation of the pelvis that allows maximum freedom of movement for the upper body and represent an excellent pressure distribution solution. 

    All our seat cushions are designed for users who spend many hours in the seat, and are constructed in such a way that the cushions are not ‘sat through’. The height of the ergonomically shaped back cushion can be individually adjusted. It provides optimum stability and head control, which is especially important during long periods of sitting. The Netti back cushions provide freedom of movement during activities.


Seat width

25-60 cm

Seat depth

30-55 cm


Cushion height

8 cm


Ready for use

Pressure distributing




Temperature stabilizing


NORWAY: Alu Rehab AS - Bedriftsveien 23 - 4353 Klepp stasjon - Tel (+47) 51 78 62 20 - Fax (+47) 51 78 62 21 - post@My-Netti.com
DENMARK: Alu Rehab ApS - Kløftehøj 8 - 8680 Ry - Tel (+45) 8788 7300 - Fax (+45) 8788 7319 - info@My-Netti.com
Privacy policy